Oracle SUN X4-8, Installation Manual

Page: 58 / 154

Modify IPv4 Network Settings From the Oracle ILOM CLI
To modify IPv6 network settings, see “Modify IPv6 Network Settings From the Oracle ILOM
CLI” on page 60 .
Note -
You can also change network settings using the BIOS Setup Utility. For instructions, see
the Sun Server X4-8 Service Manual .
1. Log in to the Oracle ILOM CLI. See:
■
“Log In to Oracle ILOM Using a Local Serial Connection” on page 55
■
“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 55
Note -
If you are logged in to Oracle ILOM using an Ethernet connection, your connection is
terminated when you set
commitpending
to
true
. When this happens, log back in using the new
settings.
2. Use the
cd
command to navigate to the
/SP/network
directory:
->
cd /SP/network
3.
Do one of the following:
■
If you have a DHCP server on the network, type the following command to
view the settings assigned to the server by the DHCP server:
->
show /SP/network
■ If there is no DHCP server, or if you want to assign settings, use the
set
command to assign values for the properties listed in the following table.
For example:
->
set /SP/network/ pendingipdiscovery=static
->
set /SP/network/ pendingipaddress=192.168.183.106
->
set /SP/network/ pendingipnetmask=255.255.255.0
->
set /SP/network/ pendingipgateway=192.168.183.254
->
set /SP/network/ commitpending=true
58 Sun Server X4-8 Installation Guide • December 2015