manualshive.com logo in svg

Oracle SUN X4-8, Installation Manual

Share
Download
Oracle SUN X4-8 Installation Manual Download Page 23

Server Supported Components

Component

Description

http://www.oracle.com/technetwork/server-storage/sun-x86/overview/index.html

Memory

Up to 192 DIMMs (24 per CPU module)

16GB DDR3 ECC Registered DIMMs or 32GB DDR3 Registered ECC LRDIMMs

6 TB maximum memory capacity

Storage devices

Eight 2.5-inch back accessible, hot swappable SAS-2 hard disk drives (HDDs) or eight 2.5-inch eMLC SATA-3

solid state drives (SSDs) for up to 9.6 TB of internal storage

USB 2.0 ports

Four USB ports (two external, two internal)

VGA ports

One VGA 1280 x1024 8MB @ 60 Hz graphics controller port

PCI Express 3.0 I/O slots

Eight dual PCIe card carriers (DPCC) each with two PCIe 3.0 card slots

Sixteen PCIe 3.0 slots (eight x8 slots, eight x16 slots) hot-swappable using DPCC

PCI Express I/O cards

For a list of customer-orderable I/O cards, go to the Sun x86 servers web site and navigate to the Sun Server

X4-8 page:

http://www.oracle.com/technetwork/server-storage/sun-x86/overview/index.html

Ethernet ports

Two 1 Gbps onboard Ethernet ports

Service processor

Oracle Integrated Lights Out Manager uses an Emulex Pilot 3 baseboard management controller (BMC). It

provides:

■ Remote Keyboard, Video, Mouse redirection
■ Full remote management through command-line, IPMI, and browser interfaces
■ Remote media capability (DVD, CD, ISO image)
■ Advanced power management and monitoring
■ Active Directory, LDAP, RADIUS support
■ Dual ILOM flash
■ Signed ILOM

Power supplies

Four redundant, hot-swappable front accessible power supplies

Cooling fans

Eight hot-swappable, redundant fan modules at chassis front; redundant fans in each power supply

Operating systems

■ Oracle Solaris (preinstall option)
■ Oracle Linux (preinstall option)
■ Oracle VM (preinstall option)
■ Red Hat Enterprise Linux
■ SuSE Linux Enterprise Server
■ Microsoft Windows Server
■ VMware ESXi

For more information on software go to:

http://www.oracle.com/technetwork/server-storage/oracle-x86/overview/index.html

Management software

The following options are available:

■ Oracle Integrated Lights Out Manager (ILOM) on the service processor.
■ Oracle System Assistant (OSA) on an optional internal USB flash drive.
■ Oracle Enterprise Management Ops Center, downloadable from the Oracle site.

Server Features and Components

23

Summary of Contents for SUN X4-8



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands