Oracle SUN X4-8, Installation Manual

Page: 129 / 154

Configure the Preinstalled Oracle VM Server
2.
Power on or reset the host, as follows:
■
To power on the host, use one of the following methods:
■
From the Oracle ILOM web interface , select System Information > Summary from
the navigation panel. Then, click the Turn On button next to Power State in the Actions
panel.
■
From the Oracle ILOM CLI
, type the following command from the prompt:
->
start /System
When prompted, type
y
to confirm:
Are you sure you want to start /System (y/n)?
y
Starting /System
■
To reset the server, use one of the following methods:
■
From the Oracle ILOM web interface , select Host Management > Power Control in
the navigation panel. Then, select Reset from the Select Action list box and click Save.
■
From the Oracle ILOM CLI
, type the following command from the prompt:
->
reset /System
When prompted, type
y
to confirm:
Are you sure you want to reset /System (y/n)?
y
Performing hard reset on /System
The host boots.
3.
Start the Remote Console.
■
From the Oracle ILOM web interface, select Remote Control > Redirection in
the navigation panel. Then, click the Launch Remote Console button.
■
From the Oracle ILOM CLI, type the following command at the CLI prompt:
->
start /HOST/console
Are you sure you want to start /HOST/console (y/n)?
y
Serial console started.
As the host boots, the GRUB menu appears. From the GRUB menu, you can choose whether
you want to continue to direct the display to the serial port, or whether you want to direct the
display to a device connected to the video port. For example:
GNU GRUB version 0.97 (613K lower / 2087424K upper memory)
Oracle VM server-ovs (xen-4.0.0 2.6.32.21-41ovs)
Configuring the Preinstalled Oracle VM 3.X Software 129