Storage-Related Issues
■
“Blue Ready-to-Remove LED Does Not Illuminate After Issuing the
■
“Only 24 Devices Are Displayed In The System BIOS Boot List” on page 68
The Oracle Solaris Operating System Installation
Hangs
Bug 15761911
Issue:
If you use the graphical user interface (GUI) mode to install the Oracle Solaris operating
system (OS), and you install the OS onto a volume configured on the HBA, the OS installation
might hang during the “detecting locale” portion of the installation.
Workaround:
Verify that the volume on which you plan to install the OS is not a resyncing
RAID 1 or RAID 10 volume. To prevent hangs, ensure that the volume is in optimal mode,
rather than resync mode, prior to installing the OS.
The System Hangs After Deleting a RAID Volume
Bug 15764098
Issue:
If you delete a RAID volume configured on this HBA, and that volume is in resync
mode, the system in which the HBA is installed might hang.
Workaround:
When you need to delete a RAID volume that is configured on the HBA, verfity
that the volume is in optimal mode, not in resync mode. If the volume is resyncing, wait to
delete the volume until after the resync process is complete
Pressing
Ctrl
+
N
Might Bypass Network Boot and
HBA Option ROM Load
Bug 15601623
Issue:
If you install the HBA in a Sun Fire X4170 M2 or Sun Fire X4270 M2 system, and you
press
Ctrl
+
N
on the serial console to initiate a network boot, the network boot might not be
initiated, and the Option ROM for the HBA might not be loaded.
Workaround:
Do one of the following:
Chapter 6 • Known Issues
65
Summary of Contents for SG-SAS6-INT-Z
Page 2: ......
