Oracle SG-SAS6-INT-Z Installation Manual Download Page 62

Page: 62 / 80

Utility-Related Issues

■

MegaMontiorSrv

After you have stopped these services, you can perform HBA card hotplug operations. You can

restart the MSM software services after the hotplug operations are complete.

Cannot Assign a Global Hot Spare Through the

MSM GUI

Bug 15762780

Issue:

From the MegaRAID Storage Manager (MSM) graphical user interface (GUI), after

creating a drive using 2 hard disks, the option to create a global host spare from a third hard

drive becomes inactive.

Workaround:

Assigning global hot spares is not supported through the MSM GUI. Instead, use

the

SAS2IRCU

utility to assign global hot spares.

Cannot Upgrade Firmware on the HBA Therough

the MSM GUI

Bug 15664024

Issue:

The firmware level on the HBA remains the same after using the MegaRAID Storage

Manager software to upgrade the firmware.

Workaround:

Upgrading firmware through the MegaRAID Storage Manager software is not

supported for this HBA. To upgrade firmware on the HBA, use the

SAS2IRCU

utility. You can

obtain the

SAS2IRCU

utility from the Oracle support area of the LSI web site:

http://www.lsi.com/sep/Pages/oracle/index.aspx

Utility-Related Issues

This section contains the following information:

■

“Sun Storage 6 Gb SAS PCIe HBA, Internal is Not Displayed in the BIOS Setup

Utility” on page 63

■

“A Hard Drive is Not Displayed in the BIOS Setup Utility” on page 63

■

“Non-Alphabetical Characters Are Displayed in RAID Volume Names” on page 63

Sun Storage 6 Gb SAS PCIe HBA, Internal Installation Guide For HBA Models SGX-SAS6-INT-Z and SG-SAS6-INT-Z

• May 2017

Summary of Contents for SG-SAS6-INT-Z

















































































Search results

Summary of Contents for SG-SAS6-INT-Z

Reviews:

Related manuals for SG-SAS6-INT-Z

Brands by name

Popular brands

Oracle SG-SAS6-INT-Z, Installation Manual

Search results

Summary of Contents for SG-SAS6-INT-Z

Reviews:

Related manuals for SG-SAS6-INT-Z

Brands by name

Popular brands