Adapter is Automatically Configured Upon Insertion Into a Chassis, But Then Goes Offline
When attempting to script rapid unconfiguration/configuration of the Converged Network
Adapter, you might encounter the following error message:
nwamd_ncu_handle_link_action_event: ignoring action for link:qlge1: permission denied
Workaround:
When running such scripts, keep in mind that it takes time to discover every device connected
to the Converged Network Adapter. Greater numbers of connected devices require more time
for discovery. If there are many devices connected to the Converged Netword Adapter, perform
such configurations manually at first, and note how much time is required for all devices to
become visible and usable. Add a 10% time cushion to the maximum time encountered (for
safety) and build that into the script after each
cfgadm
command. If you continue to encounter
the error message, add more time to the maximum time encountered variable in the script.
Adapter is Automatically Configured Upon Insertion Into a
Chassis, But Then Goes Offline
Bug 15678657
Issue:
Upon inserting the adapter into the chassis of a system, the system shows the adapter in the
online state, as if the adapter has been configured, even though you did not press the Attention
button on the adapter (which is a necessary step for adapter configuration). In some instances,
the adapter then goes offline, without any intervention from you, the user.
Workaround:
This might occur during installation if you insert the adapter quickly into the chassis, and at an
angle, causing the Attention button to become depressed and to potentially remain stuck in the
On position. To avoid this from occurring, follow the installation instructions in this guide and
take your time when installing the adapter into a chassis. If you install the adapter smoothly into
the chassis, the Attention button does not get stuck in the On position.
FCIO_RESET_LINK
Error Message Occurs After Issuing the
luxadm -e forcelip
Command
Bug 15632822
Chapter 4 • Known Issues
65
Summary of Contents for SG-EMFCOE2-Q-SR
Page 2: ......
