To Remove the Driver
■
If you are not installing the driver from removable media, follow these steps:
a.
Click Browse my computer for driver software.
b.
Click I don't have the disk. Show me other options.
c.
Click Browse my computer for driver software (advanced).
d.
Browse to the location of the driver, and then click Next.
A warning message might be displayed regarding the Digital Signature for Windows
Logo Certification.
5.
To continue with the installation, click Yes.
6.
To complete the installation, click Finish.
Note -
A system reboot is not required after installing the driver.
To Remove the Driver
To remove the driver in a Windows environment, uninstall it as a Plug and Play device as
follows:
1.
Power down your system.
2.
Remove the device from your system according to the manufacturer's
instructions.
Note -
Generally, you do not have to use the Device Manager or the Hardware wizard to
uninstall a Plug and Play device. After you remove the device from your system and restart
your system, Windows recognizes that it has been removed.
The following additional notes apply:
■
When the driver is updated on one port of the adapter, the second adapter port might show
the incorrect driver version. Both ports of the adapter will be updated with the new driver
when the update is performed.
■
To configure the jumbo frame for IPv6, issue the following command at the command
prompt after enabling the jumbo frame using adapter properties:
Chapter 3 • Software Installation
59
Summary of Contents for SG-EMFCOE2-Q-SR
Page 2: ......
