To Update the Driver on Windows
2.
In the right pane, double-click SCSI and RAID Controller.
3.
Right-click the FCoE Adapter, and then click Update Driver.
4.
Do one of the following:
■
If you are installing the driver from from removable media, follow these
steps:
a.
Click Search automatically for updated driver software.
b.
If the Hardware Update Wizard prompts you to search online, click Don't
search online.
The Update Wizard locates the driver, and then automatically completes the
installation.
■
If you are not installing from removable media, follow these steps:
a.
Click Browse my computer for driver software.
b.
Click I don't have the disk. Show me other options.
c.
Click Browse my computer for driver software (advanced).
d.
Browse to the location of the driver, and then click Next.
A warning message might be displayed regarding the Digital Signature for Windows
Logo Certification.
5.
To continue with the installation, click Yes.
6.
To complete the installation, click Finish.
Note -
A system reboot is not required after installing the driver.
Installing the Networking Driver
The operating system manages and controls the driver installation process; the driver follows
the process dictated by the OS. The driver installation cannot deviate from this process.
56
Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017
Summary of Contents for SG-EMFCOE2-Q-SR
Page 2: ......
