–
snmpCommunityName—Specify the name of the SNMPv2 community to use for
SNMP management.
–
snmpIpAddress—Specify the IP address to add to the SNMPv2 community for SNMP
management.
•
wancom0VLAN—(Only available on Pike and newer) Specify the bootparameter VLAN
value for the wancom0 interface.
•
networks—Specify the name of the networks to attach to each network interface.
•
portSecurityPolicy—Specify the port security policy currently in use for each network.
•
primary:fixed_ips—Specify the IP addresses for the network interfaces on the primary HA
pair. The wancom0 address gets passed in the bootparams as IP Address.
•
secondary:fixed_ip—(HA only) Specify the IP addresses for the network interfaces on the
secondary HA pair. The wancom0 address gets passed in the bootparams as IP Address.
•
virtualIPs—(HA only) Specify the virtual IP addresses for HA media interfaces.
•
virtualMACs—(HA only) Specify the virtual MAC addresses for HA media interfaces.
•
vnicBinding—Specify the virtual NIC binding type for each media interface.
See the comments in the environment file for available values.
See the README for complete instructions on deploying a Heat template.
Chapter 6
OpenStack Heat Template
6-13
