manualshive.com logo in svg

Oracle netra X5-2, Installation Manual

Share
Download
Oracle netra X5-2 Installation Manual Download Page 24

e.

Disable C6 Reporting. (Navigation: Advanced / CPU Power Management
Configuration, CPU C6 report)

f.

Change Energy Performance to Performance. For example, set
"ENERY_PERF_BIAS_CFG" mode to "PERF". (Navigation: Advanced / CPU
Power Management Configuration, Energy Performance)

g.

To decrease boot up time, Oracle recommends disabling Intel PXE Boot Agent
for both onboard and NIC ethernet ports. Press F2 and navigate to Advanced,
Network Stack Configuration. Then disable IPv4 PXE support.

Note:

PXE boot is not supported in this release.

h.

Reboot the server.

4.

Initialize the HDD.

a.

Open the ILOM remote system console to observe the system's boot cycle,
and interrupt the boot cycle to enter the MegaRAID configuration utility.

Figure 3-1    Selecting RAID Configuration

b.

Navigate the utility to establish your virtual drive's operation, initially including
the Configure action.

Chapter 3

3-2

Summary of Contents for netra X5-2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands