--cpu
Configure the CPU model and CPU features exposed to the virtual machine.
See
man virt-install
for more information.
Note:
The
--cpuset
and
--numatune
options may be used to establish CPU affinity
and socket pinning.
Create and Deploy on VMware®
This section provides detail on deploying Oracle Communications Session Delivery products
over the ESXI hypervisor and assumes VMware 6. The section also assumes the user
understands deployment in these environments and that the majority of deployment tasks,
from hardware installation and startup to VM resource and management setup, is complete.
For information on VMware 6, which is also supported, refer to the following link.
https://www.vmware.com/support/pubs/vsphere-esxi-vcenter-server-6-pubs.html
Before You Begin:
•
Confirm that the VMware version 6 Hypervisor is installed on an appropriate network
server.
•
Confirm that the server has 40GB of space for this installation.
Note:
The following procedure describes a typical deployment. The system may display
different screens, depending on the deployment.
Detail on Oracle Communications Session Delivery product-specific setup steps is shown
below.
1.
On the vSphere Client application Home page, go to File, Deploy OVF Template File.
2.
On the Source screen, browse to the target .ova file, and click Next.
3.
On the End User License Agreement screen, click Accept and click Next.
4.
On the Name and Location screen, do the following and click Next.
•
Name. Enter a name for the template.
•
Inventory Location. Select the location where you want to deploy the template.
5.
On the Host / Cluster screen, select the host or cluster where you want to run the
deployed template, and click Next.
6.
If applicable to your deployment, select the resource, from the Resource Pool screen, in
which you want to deploy this template, and click Next.
7.
On the Storage screen, select the destination storage for the virtual machine files, and
click Next.
Chapter 6
Create and Deploy on VMware®
6-5
