45
Safety and Handling
Safety and Handling
Safety Agency Compliance Statements
Safety Precautions
For your protection, observe the following safety precautions when setting up your
equipment:
Follow all cautions and instructions marked on the equipment.
Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
Never push objects of any kind through openings in the equipment. Dangerous
voltages may be present. Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage to your equipment.
This product is intended for restricted access whereby access is controlled
through the use of a means of security (for example, key, lock, tool, badge access)
and personnel authorized for access have been instructed on the reasons for the
restrictions and any precautions that need to be taken.
Do not directly connect this product to outdoor metallic communications cables.
Always connect the product to outdoor metallic communications cables using a
protection device that is designed for direct connection to outdoor metallic
communications cables (such as a switch or router), or use optical non-metallic
communications cables upon leaving the building.
Do not directly connect this product to outdoor power cables.
o
For AC Power, connect the product only to an indoor power distribution
system that uses current-limiting circuit breakers for AC power.
o
For DC Power, connect the product only to earthed power systems that
are completely contained within one building.
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Oracle is not
responsible for regulatory compliance of a modified Oracle product.
Placement of an Oracle Product
Caution:
Do not block or cover the openings of your
Oracle product. Never place an Oracle product near a
radiator or heat register. Failure to follow these
guidelines can cause overheating and affect the
reliability of your Oracle product.
SELV Compliance
Safety status of I/O connections comply to SELV requirements.
