manualshive.com logo in svg

Oracle Dual Port 25 Gb, User Manual

Share
Download
Oracle Dual Port 25 Gb User Manual Download Page 36

Verify the Adapter Installation (Oracle Solaris x86)

Note - 

There are two QSFP connector ports, port 1 (A) and port 1 (B).

1.

Holding the optical transceiver by the edges, align the transceiver with the slot

in the adapter and slide the transceiver into the opening.

2.

Applying even pressure at both corners of the transceiver, push the transceiver

until it is firmly seated in the slot.

3.

Repeat 

Step 1

 and 

Step 2

 to install the second optical transceiver.

4.

Power on the server.

5.

Verify the adapter installation.

Follow the instructions in the appropriate section:

■

“Verify the Adapter Installation (Oracle Solaris x86)” on page 36

■

“Verify the Adapter Installation (Linux)” on page 37

■

“Verify the Adapter Installation (Windows)” on page 37

Related Information

■

“Cable and Transceiver Overview” on page 32

■

“Adapter Description” on page 32

■

“Install the Adapter” on page 34

Verify the Adapter Installation (Oracle Solaris x86)

1.

Power on the server, and then boot the server.

2.

Check the version of the Oracle Solaris SRU.

You must have at least Oracle Solaris 11.3 SRU23 installed. For example:

$ 

pkg info entire

Name: entire
     Summary: entire incorporation including Support Repository Update
              (Oracle Solaris 11.3.23.1.0).
     ...
     <output omitted>
     ...
    Version: 0.5.23 (Oracle Solaris 11.3.23.1.0)

36

Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017

Summary of Contents for Dual Port 25 Gb

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands