manualshive.com logo in svg

Oracle Dual Port 25 Gb, User Manual

Share
Download
Oracle Dual Port 25 Gb User Manual Download Page 79

Analyze Why Changing the MTU Does Not Correctly Set the Link Property (Oracle Solaris x86)

2.

Check that the switch ports have been configured to operate in the mode in

which the adapter is running.

Related Information

■

“Analyze Why the Device Link Is Missing (Oracle Solaris x86)” on page 75

■

“Recover From a Port Hang (Oracle Solaris x86)” on page 76

■

“Analyze Slow Network Performance (Oracle Solaris x86)” on page 77

■

“Analyze Why Changing the MTU Does Not Correctly Set the Link Property (Oracle

Solaris x86)” on page 79

Analyze Why Changing the MTU Does Not Correctly Set

the Link Property (Oracle Solaris x86)

The 

dladm

 command might display this message:

# dladm: warning: cannot set link property 'mtu' on 'net0': link busy

It is possible that some objects defined on the link need to be removed or plumbed down.

Remove and retry the command.

# 

dladm set-linkprop -p mtu=9500 net0

For more information, refer to the Oracle Solaris 

dladm

(1M)

 man page.

Related Information

■

“Analyze Why the Device Link Is Missing (Oracle Solaris x86)” on page 75

■

“Recover From a Port Hang (Oracle Solaris x86)” on page 76

■

“Analyze Slow Network Performance (Oracle Solaris x86)” on page 77

■

“Analyze Why the Link Is Not Up After Back-To-Back Cable Connection (Oracle Solaris

x86)” on page 78

Troubleshooting the Adapter (Oracle Solaris x86)

79

Summary of Contents for Dual Port 25 Gb

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands