manualshive.com logo in svg

Oracle Dual Port 25 Gb, User Manual

Share
Download
Oracle Dual Port 25 Gb User Manual Download Page 65

Configure VLANs (Linux)

Configure VLANs (Linux)

1.

Ensure that the 

bnxt_en

 module is loaded.

# 

modprobe bnxt_en

2.

Plumb the adapter's interface.

# 

ifconfig eth6 

ipv6address

up

where 

ipv6address

 is the IP address of the interface.

3.

Add the VID.

For example:

# 

vconfig add eth6 5

where 

eth6

 is the interface, and 

5

 is the 

VID

.

Note - 

In Linux systems, you can use any single digit as the VID.

4.

Configure the 

bnxt_en

 VLAN.

For example:

# 

ifconfig eth6.5 

ipv6address

up

where 

ipv6address

 is the IP address of the interface.

Related Information

■

“Configure VLANs (Oracle Solaris x86)” on page 64

■

“Configure VLANs (Windows)” on page 65

■

“Configure VXLANs (Oracle Solaris x86)” on page 66

Configure VLANs (Windows)

1.

Click Control Panel.

2.

Click Network Connection.

3.

Click the folder icon from the sub-manual bar.

Configuring VLANs and VXLANs

65

Summary of Contents for Dual Port 25 Gb

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands