Oracle Dual Port 25 Gb, User Manual

Page: 52 / 88

Set Driver Parameters (Oracle Solaris x86)
# grep bnxt /etc/path_to_inst
"/pci@0,0/pci8086,3c0a@3,2/pci108e,7b15@0" 0 "bnxt"
"/pci@0,0/pci8086,3c0a@3,2/pci108e,7b15@0,1" 1 "bnxt"
In these preceding examples:
■
The first part within the double quotes specifies the hardware node name in the device tree.
■
The number not enclosed in quotes is the instance number (shown in bold for emphasis).
■
The last part in double quotes is the driver name.
Note -
To unambiguously identify a PCIe device in the
bnxt.conf
file, use the name, parent
name, and unit address for the device. In the example, the name is
pci108e,7b15
, the parent is
/pci@0,0/pci8086,3c0a@3,2
, and the unit address is
0
. Refer to the Oracle Solaris pci(4) man
page for more information about the PCIe device specification.
2.
Set the parameters for the
bnxt.conf
devices in one of these ways:
a.
Copy the
bnxt.conf
file to the
/kernel/drv/
and edit the copied file.
Save the
bnxt.conf
file and reboot the system. See “Driver Parameters (Oracle Solaris
x86)” on page 53 .
"/pci@2,0/pci8086,2f08@3/pci108e,3044@0" 0 "bnxt"
"/pci@2,0/pci8086,2f08@3/pci108e,3044@0,1" 1 "bnxt"
b. Set the properties.
# dladm show-linkprop -p flowctrl net5
LINK PROPERTY PERM VALUE EFFECTIVE DEFAULT POSSIBLE
net5 flowctrl rw no no no no,tx,rx,bi,
pfc,auto
flow_control = 3;
For bidirectional flow control:
# dladm set-linkprop -p flowctrl=bi net5
For more information, refer to the Oracle Solaris
dladm
(5) man page.
Related Information
■
“Driver Parameters (Oracle Solaris x86)” on page 53
■
“Set Driver Parameters (Linux)” on page 53
52 Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017