Oracle Dual Port 25 Gb, User Manual

Page: 34 / 88

Install the Adapter
Do not straighten the cable
to correct a bend that is too
tight. Leave the cable bend
as is.
Do not hang the cable
for a length more than 2
meters (7 feet). Minimize
the hanging weight with
intermediate retention
points.
Do not drop the cable or
connectors from any height.
Gently set the cable down,
resting the cable connectors
on a stable surface.
Do not cinch the cable with
hard fasteners or cable ties.
Use soft hook-and-loop
fastener for bundling and
securing cables.
Do not drag the cable or
its connectors over any
surface. Carry the entire
cable to and from the points
of connection.
Do not force the cable
connector into the
receptacle by pushing on the
cable. Apply connection or
disconnection forces at the
connector only.
Related Information
■
“Adapter Description” on page 32
■
“Install the Adapter” on page 34
Install the Adapter
These instructions describe the basic tasks required to install the adapter. Refer to the server's
installation or service manual for specific PCIe installation instructions.
1. Halt and power off the server.
2. Power off all of the peripherals connected to the server.
3. Open the server chassis.
4. Attach an antistatic wrist strap to the server chassis.
5. Remove the slot cover from the chassis.
34 Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017