•
Use the
oakcli configure firstnet
command to configure an initial
network on Oracle Database Appliance that enables you to download deployment
software.
•
Use the
oakcli configure network
command to configure the network after
either replacing a network card or swapping the public network from copper to
fiber and vice versa. The meaning of the command changes depending on which
parameter you use.
•
Use the
oakcli configure oda_base
command to change the CPU core count
assigned to ODA_BASE, add or remove virtual local area networks assigned to
ODA_BASE, and adjust resource allocation among user domains and between
ODA_BASE and other user domains.
•
Use the
oakcli
configure repo
command to increase the size of a shared
repository.
oakcli configure additionalnet
Use the
oakcli configure additionalnet
command to configure any unconfigured
public networks in bare metal, Domain 0, and ODA_BASE.
Syntax
oakcli configure additionalnet [-h]
Parameter
-h
displays online help for using the command.
Usage Notes
The
oakcli configure additionalnet
command automatically detects any
unconfigured networks and runs an interactive script that guides you through how to
configure the network. The script requires the following input:
•
Interface name
•
DHCP [Y/N]
•
IP
•
Netmask
Note:
If you are running the command on a bare metal deployment, then the
interface name expects a bond name. If you are running the command on
Dom0, then the interface name expects a net name. If you are running the
command on Dom1, then the interface name expects an eth name.
Chapter 14
oakcli configure commands
14-8
Summary of Contents for Database Appliance X6-2-HA
Page 15: ...Index xv...
