Oracle B31003-01 Page 27 User Manual Download

Page: 27 / 112

Resolving Specific Errors

Troubleshooting OracleAS Adapter for IMS/TM

3-13

Action:

A system or process quota limit has been exceeded. Either increase the

quota or lower the

Clients per server limit

field value in the WS Info. section of

the daemon configuration.

C047: %s out of memory

Cause:

Not enough memory was available to Oracle Connect to complete a

requested operation.

Action:

Terminate unnecessary processes running on the server.

Action:

Add more memory to the system.

Action:

Allow the process to use more memory.

Action:

Limit the number of processes the daemon may start. If the demand for

servers exceeds the number of available servers, clients get a message telling them
the maximum number of servers has been reached and asking them to try again
later.

C066: Communication error with the server%s

Cause:

Connection to the Oracle Connect daemon or server failed, or an

established session with a server has failed.

Action:

Check the remote computer definition in the oc4j-ra-xml file.

Action:

Check that the daemon is up on the IBM OS/390 or z/OS platform. Use

the Status option in the Runtime Manager perspective.

Action:

In case of a network problem, check the network connection by trying to

ping the host computer or run FTP or Telnet to or from it.

C067: Unexpected error occurred in server function %s

Cause:

One of the server functions has exited with an exception, such as an

Abend, or Invalid Instruction.

Action:

Contact Oracle Support Services.

C068: Fail to login daemon

Cause:

The daemon is not running on the server computer.

Action:

Use the Status in Oracle Studio Runtime Manager perspective to check

whether a daemon is running on the server

Action:

Have the system administrator reinstall Oracle Connect on the server.

C069: Fail to get server

Cause:

The Oracle Connect daemon on the server computer could not start a

server process to serve the client. A separate message provides more detail on why
the server process could not start.

Action:

There are many possible causes of this error. If the cause is not clear from

the related message, see the Oracle Connect daemon log file on the server

Action:

The resolution to this error is highly dependent on the particular cause.

The following are some typical causes and resolutions.

Action:

Some process creation quota was exceeded. Either try again later or

increase the quota or the other relevant system resources.

See Also:

"WS Info."

on page C-7.

Summary of Contents for B31003-01

















































































































Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands

Oracle B31003-01, User Manual

Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands