Oracle B31003-01 Page 21 User Manual Download

Page: 21 / 112

Resolving Specific Errors

Troubleshooting OracleAS Adapter for IMS/TM

3-7

C009: IRPCD process has been terminated by user request.

Cause:

This message is informational only. The daemon successfully shut down.

Action:

No action required.

C00A: Application %s not found.

Cause:

The requested workspace does not exist.

Action:

Check that the workspace defined in the

oc4j-ra.xml

file is also

defined in the daemon configuration on the IBM OS/390 or z/OS platform. Use
the Status option in the Runtime Manager perspective.

C00B: Invalid IRPCD client context.

Cause:

A non-Oracle Connect program is trying to connect to the daemon.

Action:

Check the processes and kill the relevant process with a system

command.

C00C: Daemon request requires a server login.

Cause:

A non-Oracle Connect server or program was trying to use a daemon

service reserved for Oracle Connect servers.

Action:

Check the processes and kill the relevant process with a system

command.

C00D: Daemon request requires a client login.

Cause:

The requested daemon requires a valid client login, which was not

supplied.

Action:

Reissue the command and specify a username and password.

Action:

Edit the user profile in Oracle Studio to specify a valid username and

password for the IBM OS/390 or z/OS platform.

C00E: Daemon request requires an administrator login.

Cause:

The requested daemon service requires an administrative login.

Action:

Edit the daemon security in Oracle Studio to specify a valid administrator

username and password.

C00F: Anonymous client logins are not allowed.

Cause:

The daemon is configured to require a valid username and password,

which were not supplied.

Action:

Enable anonymous client access in daemon security in Oracle Studio.

Action:

Edit the user profile in Oracle Studio to specify a valid username and

password for the IBM OS/390 or z/OS platform.

See Also:

See Also:

Summary of Contents for B31003-01

















































































































Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands

Oracle B31003-01, User Manual

Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands