background image

Metadata for the Back-end Adapter

A-2

  Oracle Application Server Adapter for IMS/TM User’s Guide

The 

General

 tab is shown in the following figure:

Figure A–1  The General tab

The 

General

 tab comprises fields, as listed in the following table:

Interaction Tab

Use the 

Interaction

 tab to define the general details of the interaction in addition to its 

input and output definitions.

The 

Interactions

 tab is shown in the following figure:

Table A–1   General tab Components

Field

Description

Adapter definition name

Specifies the name of the adapter definition.

Description

Specifies an identifying description of the adapter.

Authentication mechanism

Specifies the authentication method used to access the 
adapter. The available mechanisms are:

kerbv5

none

basic password

Max request size

Specifies the maximum size in bytes for an XML request or 
reply. Larger messages are rejected with an error.

Max active connections

Specifies the maximum number of simultaneous 
connections for an adapter (per process).

Max idle timeout

Specifies the maximum time, in seconds, that an active 
connection can stay idle. After that time, the connection is 
closed.

Adapter Specifications

Specifies the adapter-specific properties for an interaction. 
The IMS/TM back-end adapter does not have any 
adapter-specific properties.

Summary of Contents for B31003-01

















































































































Reviews: