manualshive.com logo in svg

Oracle B31003-01, User Manual, Page: 62 / 112

Share
Download
Oracle B31003-01 User Manual Download Page 62

Configuring Oracle Connect

6-14

  Oracle Application Server Adapter for IMS/TM User’s Guide

Installing Oracle Studio from the CD-ROM

Assuming that the CD-ROM drive is D:, the installation file is located in the 

D:\Oracle_Studio

 directory. Install Oracle Studio from the CD-ROM by running 

the self-extracting executable installation file, 

OSL90

4-

win32.exe

.

Configuring Oracle Connect

All modeling of Oracle Connect is performed using Oracle Studio. To use Oracle 
Studio, you first configure it to enable access to the IBM OS/390 or z/OS platform 
where IMS/TM runs.

To configure Oracle Connect, refer to the following sections:

■

Setting Up the IBM OS/390 or z/OS Platform in Oracle Studio

■

Securing Access to Oracle Connect

■

Modeling Interactions for OracleAS Adapter for IMS/TM

■

Viewing the XML Schema

■

Creating XML Schemas

Setting Up the IBM OS/390 or z/OS Platform in Oracle Studio

Perform the following steps to configure the IBM OS/390 or z/OS, using Oracle 
Studio:

1.

From the 

Start

 menu, select 

Programs

, 

Oracle, and then select Studio

. 

2.

Right-click 

Machines

 in the 

Configuration Explorer

 and select 

Add Machine

  The 

Add Machine screen is displayed (see 

Figure 6–1

).

Note: 

If Oracle Studio is already installed because you are also 

using another legacy adapter, then you do not need to reinstall it.

The other legacy adapters are:

■

OracleAS Adapter for Tuxedo

■

OracleAS Adapter for CICS

■

OracleAS Adapter for IMS/DB

■

OracleAS Adapter for VSAM

Note: 

If you are installing Oracle Studio on a Windows XP 

computer, you cannot specify a logical drive as the Destination 
folder for the installation.

Note: 

The following tasks assume you have permission to access 

the IBM OS/390 or z/OS platform and that the Oracle Connect 
daemon is running on this computer.

Check with the system administrator to ensure these requirements 
are fulfilled.

Summary of Contents for B31003-01

















































































































Reviews:

No comments