optris Top-down GIS, Operator'S Manual

Page: 6 / 48

-
6
-
1 General notes
1.1 Intended use
Thank you for choosing the optris
®
Top-down Glass Inspection System (TDGIS) .
This compact system is ideal for measuring glass and can be used for process control in glass tempering
machines. This system consists of several components which are already pre-wired and ready for immediate
use. The entire system is supplied with 24 V and is connected to a PC via an Ethernet cable. With the analysis
software PIX Connect and a predefined layout the system can be used directly.
Features:
▪
Top-down system with additional reference pyrometer from below for automatic emissivity correction
on low-E glasses
▪
Digital controlled lens protection system (DCLP) avoids additional air purge
▪
Automatic calculation of the glass surface
▪
Pre-assembled system for easy installation as retrofit on glass tempering furnaces
Read the manual carefully before the initial start-up. The producer reserves the right to change
the herein described specifications in case of technical advance of the product.