optris Top-down GIS, Operator'S Manual

Page: 24 / 48

-
24
-
3.2 Software Installation
After having connected your Hardware, you can start with the configuration in the PIX Connect software.
Now that you have successfully connected your hardware, you can start with the configuration in the PIX
Connect software.
But before you can do this, you must first set up the USB server. On the supplied USB
stick, in the folder USB Sever, you will find two software programs (
WuTility and USB
Redirector ) that are required for this. Detailed instructions for setting up the server can
be found in the folder Documentation / Manuals / ACPIUSBSGB-QSG-Dxxxx-xx-x .
After successful integration of the USB server on your computer, the software PIX Connect can be installed.
This software is also on the USB stick and can also be downloaded here. To install the software, open the
Setup.exe .
After the installation the software can be opened. When using the camera for the first
time, the calibration files must be downloaded from the Internet. Alternatively, they can
also be downloaded from the USB stick.