-
Installation
25
-
The software starts with a so-called standard layout. There are two special predefined layouts included in the
software package. These are already customized for the glass system and contain all the necessary settings.
To load them, go to the menu
Tools
and
Layouts
. Select the layout and press
Load layout
.
The software already contains two predefined layouts called "
Top-down GIS
” and “
Top-down
GIS Demo
”. You can load these layouts in the menu under
Tools
and
Load layout
and use it as
a presetting.
The layout named "Top-down GIS Demo" is used for demonstration and is set to be used for temperatures
from -20 to 900 °C.
The layout named "Top-down GIS" has been configured for the actual glass measurement. Here the
temperature range of 150-900 °C is set.
Summary of Contents for Top-down GIS
