optris PI 400 LW, Operator'S Manual

Page: 38 / 52

optris PI LightWeight Kit
– E2013-04-B
36
Ethernet network connection/ NetBox LW powered via PoE injector
If the NetBox is used in a network it gets its IP address from a DHCP server. In order to find the NetBox in
the PIConnect of your local PC the address range of the local network must be known.
For this purpose please start the program
NetBox Lister .
► Remote Access to the NetBox
Please start now the PIConnect on your local PC and open the menu
Tools/ Extended/ Remote devices... .
In the window which opens set a hook on Enable and enter the address range of your local network under
Detect devices . The fourth block should have the range 0 to 255 . If you now press Ping all computers inside
the selected address range will be shown.
Under
Remote framerate you can enter the desired frame rate which should be transmitted via the network.