optris PI 400 LW, Operator'S Manual

Page: 24 / 52

optris PI LightWeight Kit
– E2013-04-B
22
After booting the system the factory default setting of the NetBox LW starts the PI Connect in full screen
mode with a special flight layout (Selection: User defined in Application Start Config).
The
Imager Net Server application is needed for the operation modes:
- Ethernet direct connection to a PC (point-to-point connection)
- Ethernet communication via a network or via the internet
In case you would like to start PI Connect or Imager Net Server with changed command line parameters
[Args] please select
User defined .
Example
The following configuration starts the PIConnect in the full screen mode:
The start options selected in the configuration
dialog are saved automatically in the NetBox
and are available after a restart.