optris PI 400 LW, Operator'S Manual

Page: 32 / 52

optris PI LightWeight Kit
– E2013-04-B
30
If your PC is not connected to any network,
please go to
Change adapter settings after
you opened the Network and Sharing Center .
Now go to Local Area Connection , right mouse
button: Properties .
[continue at item 4]
1. Go to System controls ; open Network and Sharing Center.
2. If you have an existing connection to a network (company network e.g.) you should see the following
information:
3. Go to
Local Area Connection
– a status screen according [1] will be shown. Then go to
Properties.
4. In the following window [2] mark Internet protocol Version 4 (TCP/IPv4) and go again to Properties .