optris PI 400 LW, Operator'S Manual

Page: 20 / 52

optris PI LightWeight Kit
– E2013-04-B
18
Remote Access to the NetBox LW
For settings on the NetBox LW you can connect a keyboard and a mouse to the available USB sockets as
well as a monitor to the VGA socket (or a TV monitor via the TV
out
adapter cable).
► Stand-alone Operation
Another very simple way are remote control software, for example remote desktop (RDP) which is available
on each Windows system or
Ultra VNC which you will find on your software CD. After installation you can
have access to the NetBox either from a PC directly connected over an Ethernet cable or from a PC which is
located anywhere and connected to the same network. Also remote connection via the internet is possible.
1)
To install Ultra VNC on your PC please start install.bat which is located on your PIConnect-CD in the folder
\PI NetBox . After installation you will find the following short cuts on your desktop:
Please use the short cut
PI-NetBox UVNC for access to a NetBox which is directly connected to your PC
over an Ethernet cable. After starting the UVNC viewer using this shortcut you should see immediately a
window which shows the screen of the NetBox.
Please use the short cut UltraVNC Viewer for access to a NetBox inside your network. After starting UVNC
using this short cut you should see at first the following screen:
1)
For remote access from outside to a NetBox LW connected to a company network please ask your system administrator for possibly
necessary settings.