optris PI – E2010-03-A
34
Ticking off the
Show grippers/gripper labels
enables you to change the position or the size of defined
measure areas by using the mouse.
Use the
Name
field to rename each measure area.
Mode
allows you to define the type of area (measure points
or rectangle).
Specify what temperature value -
minimum
,
mean value
or
maximum
- should be shown. Using
Bind to
profile
you can assign each measure area to specified temperature profile
In the
Position
section the exact position of the measure area within the camera image can be defined. If
desired the area can represent a
hot spot
(spot with highest temperature in the image) or a
cold spot
(spot
with lowest temperature in the image)
Measure area assigned to a temperature profile
(imeasure point )
Measure area assigned to a temperature
(reactangle)
