Optoma X416 Page 66 User Manual Download

Page: 66 / 71

English

aDDITIonal InfoRmaTIon

Remote control problems

If the remote control does not work

Check the operating angle of the remote control is pointed within ±15° horizontally and ±10° vertically

to the IR receivers on the projector.
Make sure there are not any obstructions between the remote control and the projector. Move to within

7 m (23 ft) of the projector.
Make sure batteries are inserted correctly.

Replace batteries if they are exhausted.

Warning indicators

When the warning indicators (see below) light up or flash, the projector will automatically shutdown:

"LAMP" LED indicator is lit red and if "On/Standby" indicator flashes amber.

"TEMP" LED indicator is lit red and if "On/Standby" indicator flashes amber. This indicates the

projector has overheated. Under normal conditions, the project can be switched back on.
"TEMP" LED indicator flashes red and if "On/Standby" indicator flashes amber.

Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or

flash, please contact your nearest service center for assistance.

lED lightning messages

Message

Power LED

Temp-LED

Lamp-LED

(Red)

(Green or Blue)

(Red)

Standby state

(Input power cord)

Steady light

Power on (Warming)

Flashing

(0.5 sec off /

0.5 sec on)

Power on and Lamp

lighting

Steady light

Power off (Cooling)

Flashing

(0.5 sec off /

0.5 sec light). Back

to red steady light

when cooling fan

turns off.

Quick Resume (100

secs)

Flashing

(0.25 sec off /

0.25 sec light)

Error (Over temp.)

Flashing

Error (Fan failure)

Flashing

Error (Lamp failure)

Flashing

Power off:

Power off

Power off?

Press power key again.

Summary of Contents for X416








































































Search results

Summary of Contents for X416

Reviews:

Related manuals for X416

Brands by name

Popular brands

Optoma X416, User Manual

Search results

Summary of Contents for X416

Reviews:

Related manuals for X416

Brands by name

Popular brands