English
50
UsInG THE PRoJECToR
Specification for “RS232 by TELNET”
:
Telnet: TCP.
1.
Telnet port: 23 (for more detail, kindly please get contact with the service agent or team).
2.
Telnet utility: Windows “TELNET.exe” (console mode).
3.
Disconnection for RS232-by-Telnet control normally: Close
4.
Windows Telnet utility directly after TELNET connection ready.
5.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
±
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for
±
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
±
Info menu
View the projector information as listed below:
Regulatory
Serial Number
Source
Resolution
Refresh Rate
Display Mode
Power Mode (Standby)
Lamp Hours in total and in a set mode as listed below:
Bright
±
Eco.
±
Dynamic
±
Eco+
±
Total
±
Network status
IP Address
Projector ID
Filter Usage Hours
Brightness Mode
FW Version (system, LAN, MCU)
Summary of Contents for X416
Page 1: ...User manual DLP Projector ...
Page 71: ...www optoma com ...
