English 53
maInTEnanCE
Replacing the lamp (continued)
1
3
4
2
5
Procedure:
Switch off the power to the projector by pressing the "
1.
" button on the remote control or the projector
keypad.
Allow the projector to cool down for at least 30 minutes.
2.
Disconnect the power cord.
3.
Unscrew the screw on the cover.
4.
1
Open the cover.
5.
2
Unscrew the screw on the lamp module.
6.
3
Lift up the lamp handle.
7.
4
Remove the lamp module carefully.
8.
5
To replace the lamp module, reverse the previous steps.
9.
Turn on the projector and reset the lamp timer.
10.
Lamp Reset: (i) Press "Menu" > (ii) Select "Setup" > (iii) Select "Lamp Settings" >
(iv) Select "Lamp
Reset" > (v) Select "Yes".
Summary of Contents for X416
Page 1: ...User manual DLP Projector ...
Page 71: ...www optoma com ...
