12
E
nglish
Installation
Powering Off the Projector
1.
Press the “Power” button to turn off the projector lamp.
2.
After pressing “Power,” you will see the following message,
“Power off the lamp? ” displayed on the screen. Press the
“Power” button again to confirm, otherwise the message will
disappear after five seconds.
3.
When the projector is off, the “Power” LED indicator will
be orange approximately 120 seconds for the lamp cooling.
Only after the “Power” indicator blinks green and the projec-
tor is at the standby mode, the power cord can be unplugged
from the unit.
4.
Do not turn on the projector immediately following a power
off procedure.
When the “LAMP” indicator lights orange, the lamp may fail.
Please contact your local reseller or service center.
When the “TEMP” indicator flashes orange for about ten seconds,
you will see a message “Fan Fail” or “Over Temperature”on the
display. The projector will automatically shut down. Under normal
conditions, the projector can be switched on again for your
presentation. If the problem persists, contact your local reseller or
service center.
