English
23
Changing the lamp
The projection display will detect the lamp life itself. It will show you a warning
message when the lamp is used over working hours. When you see this message,
change the lamp as soon as possible. Please refer to the “Accessories” on page
29 for the order information.
Make sure the projection display has cooled for at least 30 minutes before
change the lamp.
Warning: Lamp compartment is hot! Allow it to cool before changing
lamps!
4
Lamp Changing Procedure:
1. Turn off the power and allow the projector to cool down.
2. Disconnect the power cord.
3. Unscrew the 2 screws of the lamp cover and remove the cover.
Lamp Cover
Screws
Lamp Cover
Screws
