English
Powering On/Off the Projection Display
Powering On Projection Display.
4
4
4
4
4
Switch on the power; then turn on the lamp.
The “POWER/STANDBY” indicator will blink green when the display
initializes. After you press the “POWER” button, it will light green solidly and also
the “LAMP” indicator lights amber of about 30 seconds.
11
POWER /
STANDBY
LAMP
TEMP.
Powering off projection display
4
4
4
4
4
Turn off lamp power first for one minute and then switch off the power.
Press “POWER” button first, you will see the second “LAMP” indicator blinking.
You have to wait for about one minute until this indicator has been extinguished then
you can switch off the power.
POWER
* When the “LAMP” indicator lights amber solidly, please change a new lamp
module.
* When the “TEMP.” indicator lights amber solidly, it indicates the display
has been overheated. The display will automatically shut down itself. Under
normal usage environment, the display can be switched on again for your
presentation. If not, you may contact your local dealer or our service center.
