USER MANUAL
FOTEMP1
20
SOFTWARE
Installation
The accompanying software “FoTempMKT”
establishes the connection to the FOTEMP
device, displays the measured temperatures
graphically and saves the temperature data into
a log file, if needed.
For installation simply copy the file „FOTEM-
PMKT.EXE“ to a local hard disk folder and start
the program.
Set up
Before establishing the first connection, please
check whether the FOTEMP device is
connected to the power supply and the PC via
the RS232 cable respectively.
Furthermore the COM port and connection
settings should be set correctly (button
“Portsettings”), see page 22.
Press the“Connect“ button : the connected de-
vice should display a temperature value shortly.
If an error occurs during the measurement (e.g.
no sensor connected) the display will show
“Sensor?” and the LED will flash red light.
Summary of Contents for FOTEMP1
Page 1: ...FOTEMP1 USER MANUAL ...
