USER MANUAL
FOTEMP1
11
(left and right). Confirm your selection also by
pressing the middle key. To change the values,
use the up and down keys.
2) Fold out stands
Integrated fold out stands; turn to individually
adjust height of front panel.
3) LCD-TFT display
The LCD display shows the temperature
readings for the user selected channels. The
temperature values are displayed either in Grad
Celsius (°C) or Fahrenheit (F). Selections can be
made in the menu via the keypad.
4) Sensor connectors
These are ST type connectors, mating to each of
the 4 optical temperature sensors. If you need
to extend the fiber optic temperature sensor
please use the extension cables also available
from Optocon AG. For thermometers that have
only 1 or two channel(s), only 1 or t2 sensor
connectors are used.
5) RS-485 interface
This interface is used to configure and extract
information for the instrument.
6) Power switch
Make sure the power supply in connected and
powered.
7) Power switch
Please use only the power supply provided.
8) RS-232 interface
9) USB interface
10) Relay output
Summary of Contents for FOTEMP1
Page 1: ...FOTEMP1 USER MANUAL ...
