V 1.0 - eng
4
MACHINE VISION LAB KIT
| QUICK START GUIDE
2. Safety note
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings
: Serious injury or death may occur if any of the warnings are neglected.
Cautions
: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region. Please refer to technical specifications for detailed information.
● Do not connect several devices to one power adapter as adapter overload may cause over-
heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket. When the product is
mounted on wall or ceiling, the device shall be firmly fixed.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Cautions
● Make sure the power supply voltage is correct before using the devices.
● Do not drop the devices or subject them to physical shock.
● Do not place the devices in extremely hot, cold, dusty or damp locations, and do not expose
it to high electromagnetic radiation.
● To avoid heat accumulation, good ventilation is required for operating environment.
● Keep the devices away from liquid while in use.
● If the product does not work properly, please contact our technical support. Never attempt to
disassemble the devices yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
