V 1.0 - eng
15
MACHINE VISION LAB KIT
| QUICK START GUIDE
Before using the camera, you need to configure the IP address of the camera. The IP addresses of
the camera and the local computer should belong to the same network segment. You can use the
ping command on the local computer to test the network connectivity.
1. Click
Start
Control Panel
Network and Internet
Network and Sharing Center
Change adapter settings
, select the network connection and click Properties.
2. Double click the TCP protocol, and you can set select
Obtain an IP address automatically
.
3. (Optional) You can also select
Use the following IP address
, and set the IP address with
the same subnet of the camera.
4. Click OK to save the settings.
