V 1.0 - eng
45
COE LS-X Line Scan Camera | USER MANUAL
⚫
Set Strobe Line Delay
The camera supports setting strobe line delay to meet actual demands. When exposure starts, the
strobe output doesn’t take effect immediately. Instead, the strobe output will delay according to the
strobe line delay setting.
Click
Digital IO Control
>
Strobe Line Delay
, and enter
Strobe Line Delay
according to actual
demands.
Figure 1-44
Set Strobe Line Delay
The sequence diagram of strobe line delay is shown below.
Figure 1-45
Sequence Diagram of Strobe Line Delay
The camera’s height parameter is 4 in the sequence diagram above.
⚫
Set Strobe Line Pre Delay
The camera also supports the function of strobe line pre delay, which means that the strobe signal
takes effect early than exposure. This function is applied to the external devices that have slow
response speed.
Click
Digital IO Control
>
Strobe Line Pre Delay
, and enter
Strobe Line Pre Delay
according to
actual demands.