manualshive.com logo in svg

opto engineering COE LS-X Series, User Manual

The COE LS-X Series by Opto Engineering is a cutting-edge product designed to provide unmatched precision in optical measurements. For detailed instructions, including setup and troubleshooting, users can conveniently download the comprehensive User Manual for free at manualshive.com. Unlock the full potential of your COE LS-X Series with our user-friendly manual.

Share
Download
background image

 

 

 

 

 

V 1.0 - eng 

 

2 

 

COE LS-X Line Scan Camera | USER MANUAL 

Legal Information 

About This Manual 

This manual is applicable to the COE LS-X line scan cameras. 
The  Manual  includes  instructions  for  using  and  managing  the  Product.  Pictures,  charts, 
images  and  all  other  information  hereinafter  are  for  description  and  explanation  only.  The 
information  contained  in  the  Manual  is  subject  to  change,  without  notice,  due  to  firmware 
updates or other reasons. Please find the latest version of this Manual at the company website 
Please  use  this  Manual  with  the  guidance  and  assistance  of  professionals  trained  in 
supporting the Product. 

Trademarks 

Trademarks and logos mentioned are the properties of their respective owners. 

Disclaimer 

TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  THIS  MANUAL  AND  THE 
PRODUCT  DESCRIBED,  WITH  ITS  HARDWARE,  SOFTWARE  AND  FIRMWARE,  ARE 
PROVIDED  “AS  IS”  AND  “WITH  ALL  FAULTS  AND  ERRORS”.  OUR  COMPANY  MAKES  NO 
WARRANTIES, 

EXPRESS 

OR 

IMPLIED, 

INCLUDING 

WITHOUT 

LIMITATION, 

MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. 
THE  USE  OF  THE  PRODUCT  BY  YOU  IS  AT  YOUR  OWN  RISK.  IN  NO  EVENT  WILL  OUR 
COMPANY  BE  LIABLE  TO  YOU  FOR  ANY  SPECIAL,  CONSEQUENTIAL,  INCIDENTAL,  OR 
INDIRECT  DAMAGES,  INCLUDING,  AMONG  OTHERS,  DAMAGES  FOR  LOSS  OF  BUSINESS 
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR 
LOSS  OF  DOCUMENTATION,  WHETHER  BASED  ON  BREACH  OF  CONTRACT,  TORT 
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH 
THE  USE  OF  THE  PRODUCT,  EVEN  IF  OUR  COMPANY  HAS  BEEN  ADVISED  OF  THE 
POSSIBILITY OF SUCH DAMAGES OR LOSS.  

YOU  ACKNOWLEDGE  THAT  THE  NATURE  OF  THE  INTERNET  PROVIDES  FOR  INHERENT 
SECURITY  RISKS,  AND  OUR  COMPANY  SHALL  NOT  TAKE  ANY  RESPONSIBILITIES  FOR 
ABNORMAL  OPERATION,  PRIVACY  LEAKAGE  OR  OTHER  DAMAGES  RESULTING  FROM 
CYBER-ATTACK,  HACKER  ATTACK,  VIRUS  INFECTION,  OR  OTHER  INTERNET  SECURITY 
RISKS;  HOWEVER,  OUR  COMPANY  WILL  PROVIDE  TIMELY  TECHNICAL  SUPPORT  IF 
REQUIRED. 

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND 
YOU  ARE  SOLELY  RESPONSIBLE  FOR  ENSURING  THAT  YOUR  USE  CONFORMS  TO  THE 
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A 
MANNER  THAT  DOES  NOT  INFRINGE  ON  THE  RIGHTS  OF  THIRD  PARTIES,  INCLUDING 
WITHOUT  LIMITATION,  RIGHTS  OF  PUBLICITY,  INTELLECTUAL  PROPERTY  RIGHTS,  OR 
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT 
FOR  ANY  PROHIBITED  END-USES,  INCLUDING  THE  DEVELOPMENT  OR  PRODUCTION OF 
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL 
OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR 
EXPLOSIVE  OR  UNSAFE  NUCLEAR  FUEL-CYCLE,  OR  IN  SUPPORT  OF  HUMAN  RIGHTS 
ABUSES. 

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, 
THE LATER PREVAILS. 

Summary of Contents for COE LS-X Series



















































































































Reviews:

No comments

Related manuals for COE LS-X Series

Samsung SAMSUNG WP10 Manual preview
SAMSUNG WP10
Brand: Samsung Pages: 105
Samsung SAMSUNG ST66 Manual Del Usuario preview
SAMSUNG ST66
Brand: Samsung Pages: 131
Samsung SAMSUNG ST1000 User Manual preview
SAMSUNG ST1000
Brand: Samsung Pages: 131
Samsung HZ50W Instruction Manual preview
HZ50W
Brand: Samsung Pages: 120
Samsung HZ50W Manual Del Usuario preview
HZ50W
Brand: Samsung Pages: 120
Samsung HZ10W - Digital Camera - Compact Quick Start Manual preview
HZ10W - Digital Camera - Compact
Brand: Samsung Pages: 22
Samsung QB43R Quick Setup Manual preview
QB43R
Brand: Samsung Pages: 6
Samsung GX-1L Manual De Usuario preview
GX-1L
Brand: Samsung Pages: 214
Samsung ES55 Guia Rapido preview
ES55
Brand: Samsung Pages: 34
Samsung GX-20 - Digital Camera SLR User Manual preview
GX-20 - Digital Camera SLR
Brand: Samsung Pages: 163
Samsung TL9 User Manual preview
TL9
Brand: Samsung Pages: 95
Samsung TL320 - Digital Camera - Compact Quick Reference preview
TL320 - Digital Camera - Compact
Brand: Samsung Pages: 102
Samsung SAMSUNG ST66 User Manual preview
SAMSUNG ST66
Brand: Samsung Pages: 132
Samsung EC-NV4ZZSBA/US - NV4 Digital Camera Instrucciones preview
EC-NV4ZZSBA/US - NV4 Digital Camera
Brand: Samsung Pages: 119
Samsung S85 - Digital Camera - Compact User Manual preview
S85 - Digital Camera - Compact
Brand: Samsung Pages: 110
Samsung UF-80DX Reference Manual preview
UF-80DX
Brand: Samsung Pages: 10
Samsung UF-80DX User Manual preview
UF-80DX
Brand: Samsung Pages: 46
Samsung UF-130DX Software User'S Manual preview
UF-130DX
Brand: Samsung Pages: 33

Brands by name

Popular brands

Load more brands