www.optoedu.com
14/18
3-9 Use simple polarizing kit
Simple polarizing kits includes polarizer and
analyzer. (Fig. 20)
⑴
Set analyzer and polarizer as 2-2-7 and
2-2-8. (Please take off filter slide when using
polarizer slide)
⑵
It can change position of polarizing light to
rotate analyzer.
⑶
When analyzer is at zero position, the
analyzer and polarizer are crossed.
3-10 Replace fuse
Before replace fuse, please make sure the
power switch is at “0” (Off) and cut off the
power supply. Use screwdriver to take off the
fuse
①
from fuse holder
②
and replace a new
one. (Fig 21)
★
The rating for fuse: 250V, 8A.
3-11 Mount and use TV device
⑴
Loose the lock-screw
①
on tri-tube and
take off the tri-cap
②
. (Fig 22)
⑵
Take off the caps of TV adapter
③
and
settle on tri-tube and lock by screw
①
.
⑶
Loose the lock-screw
④
on TV adapter and
take off C-mount
⑤
. Then set the C-mount to
CCD or Vidicon and connect to TV adapter
again, lock on.
⑷
Adjust the image clear through binocular
then obverse through CCD. If it is not clear,
you can adjust the adjusting ring
⑥
till clear
A13.0905
Fig.21
Fig.22
Fig.20
