www.optoedu.com
10/18
A13.0905
2-2-7 Set Analyzer
Insert the analyzer
①
into hole
②
on
microscope stand with its face up to hear click.
(Fig.8)
2-2-8 Set polarizer and filter
Insert the polarizer or filter
①
into hole
②
on
connector between microscope stand and
illuminator with its face up to hear click.
(Fig.9)
2-2-9 Connect power supply
⑴
Make sure the main power switch is at
“O” (OFF) position.
⑵
Insert one side of power plug
①
into
microscope socket
②
and the other side
connecting to power supply. (Fig. 10)
★
Don’t overexert with the wires when it
is bendy or voluble.
★
Use the wire supplied by our company
only. If it is lost or damaged, choose
another suitable one.
★
Connect all wires correctly, make sure
the microscope connect with ground.
Fig.8
Fig.10
Fig.9
