2
User
Notices
A12.1095
Ⅰ.Safety Symbols
Ⅱ.Safety Notes
1.
Open the box carefully to avoid the accessories, like lens, being polluted by fingerprint or
sweat strain, dropping to ground and being damaged.
2.
Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy
shaking environment. Make sure the stage is smooth, horizontal and firm enough.
3.
When moving the microscope, one hand hook into the upper slot behind the frame, and the
other hand hold the front bottom of frame.
4.
If the bacterium solution or the water splash to the stage, objective or viewing tube, pull out
the power cord at once, and wipe up the microscope. Otherwise, the instrument will be damaged.
5.
Be sure to keep at least 10cm away from the left, right, top, rear of the microscope from walls
and other objects, so as not to plug natural convection air, which is used for cooling.
6.
Make sure the instrument is earthed, to avoid lightning strike.
7.
Check the input voltage: be sure the input voltage which signed in the back of the microscope
is consistent with the power supply voltage, or it will bring a serious damage to the instrument.
Symbol
Meaning
Main power switch is on
Main power switch is off
/
Upper / Lower lighting
When the light switching button is pushed-in, the light source on the top
will open.When the light switching button is pushed-out, the light on the
bottom will open.
Trash
F.S-Diaphragm,
---Aperture diaphragm opening direction,
---Narrow direction
Use a wrench here
Light intensity direction. Turn toward the tip, the light intensity changes
from strong to weak
Pass CE
Push in the pull rod completely, the brightness ratio is 100:0
Push the pull rod to the middle, and the brightness ratio is 20:80
Pull out the pull rod completely and the brightness ratio is 0:100
When the switch handle of frosted filter is pressed, the frosted filter will
make light path
