14
⚫
The light box shown in the display interface No. 9 is directly installed on the rack, so the
customer does not need to install it by
himself.
4-2Installation
Steps
A12.1095
Fig.2
Ⅰ
4-2-1 Installing the stage holder
（
Fig.1
、
2
）
Turn the hand wheel so that the dovetail of the
frame rises until the limit screw exposure end face
as shown in the figure, then install the stage
holder according to the path
①
in Fig.1. Align the
dovetail groove of the stage holder with the
dovetail bulge of the frame and slide down
naturally until lower limit screw is limited. Then
the screw I in Fig.2 is screwed inward with a
wrench.
4-2-2 Installing the mechanical stage
（
Fig.3
、
4
）
The electric stage is installed according to the
path of
②
in Fig. 3. First, align the center of the
platform hole with the center of the bracket circle,
and then cover the stage down to the positioning
ring of the bracket.
After the stage is placed stably, screw the screw at
II in Fig. 4 inward with the universal wrench of
microscope belt, so that the platform can not
rotate and shake.
Fig.3
9
②
Fig.1
①
