15
A12.1095
4-2-3 Installing the nosepiece
（
Fig.5
）
Mount the nosepiece according to the assembly
path
③
in Fig.5 into the dovetail of the microscope
and push it to the bottom, then tighten the screw of
Ⅲwith universal wrench to fasten.
4-2-4 Installing the viewing head and
photo attachment/ C mount 0.5×
（
Fig.6
）
1
．
Installing the trinocular viewing head
Mount the trinocular viewing head according
to the assembly path
⑤
in Fig.6 into the
round dovetail of the microscope and tighten
the screw IV to fix the viewing head;
2. Installing the photo attachment or
C mount 0.5×
Mount the photo attachment or 0.5×C mount
according to the assembly path
⑥
into the
connecting seat of the trinocular viewing head and
tighten the screw V;
During the installation of the viewing head,
one hand should always hold the viewing head
to prevent it from falling or being broken
When the trinocular viewing head is not in
use and the photo attachment is not installed,
please cover the interface of the trinocular
viewing head and eyepiece with the
corresponding dust cover to prevent dust.
4-2-5 Installing the eyepiece
（
Fig.7
）
Insert the eyepieces into the eyepiece tube until
they are against each other according to the path
⑦
shown in Fig.7.
Fig.5
Ⅲ
③
Ⅴ
C mount 0.5
×
Photo attachment
Fig.6
⑤
⑥
Ⅳ
Fig.4
Ⅱ
