www.optoecu.com 14 / 15 [email protected]
When a camera is used, it's better to choose model
XSP-121V
or
XSP-121T
microscope.
See Fig 5., and connect the camera with the microscope as following steps:
1) Take the plastic dust cover off from the viewing head and screw the vertical tube in;
2) Take the lens away from the camera, and put the camera joint on;
3) Insert the photography eyepiece 4X into the camera mount(Sometimes there is not
a photography eyepiece 4X as the customer's requirement). Join the camera with the
mount and fix it stably.
4) Push the rod of trinocular head in completely and adjust the microscope in the best
working state according to the manual. Then pull the rod out completely. A micro-image
will appear in the camera previewing window. Focus slightly by the fine focusing knob
and adjust the position of the condenser and the diameter of the iris diphragm to make
the image clearer.
5) Take a picture.
I) Microscope with electron eyepiece:
When the electron eyepiece is used, you can choose model XSP21-01V, or
XSP21-01S, or XSP21-01T microscope. So you can observe by using common eyepiece
at the same time of showing the micro-image in the PC screen. The electron eyepiece is
also used in model XSP21-01M or XSP21-01B microscope.
See Fig 6., and connect the camera with the microscope as following steps:
1) Prepare a PC required:
Hardware
:
USB2.0 Connecting Socket;
CPU: Intel P4; EMS Memory: 256M
Hard Disk: 512M; PC Screen Resolution: 1024*768
Software: win2000(with Mend sp4); or winxp (with Mend sp2) and directx 9.0;
2) Insert the driver CD into your PC and run the installing program as the promating
information (See
Appendix B: Digital Camera Head
);
3) Prepare the microscope for using. Inser the electron eyepiece into the microscope
tube, and connect it correctly with your PC;
4) Adjust the microscope in the best working state according to the manual and find a
clear image in the eyepiece viewing field. (When a trinocular wiewing head is used, first
push the rod of the head in completely and adjust the microscope in the best working
state. Then pull the rod out completely.) Wait a moment, the micro-picture will be
showed in the PC screen. Focus slightly by the fine focusing knob and adjust the position
Fig 6. Microscope with Electron Eyepiece
Electron Eyepiece
USB2.0 Plug
PC
PC Screen
Eyepiece Linker
Vertical Tube
Rod
P.11
