USING A SELF-SIGNED CERTIFICATE
groov
Box User’s Guide
44
groov
Admin displays all of these together.
At this point, the new certificate is installed on the
groov
Box and network services restarts.
5.
Copy the
private key
portion of text and paste it to a file named
<server name>-key.pem
(where
<server name>
is replaced by the server name value you entered on the Create SSL key
form.) This is the private key that was installed on the
groov
Box in the previous step.
NOTE: Do not lose the private key. You must keep a copy of it to restore later in case you commission a
replacement groov Box or have to restore the Box to factory defaults.
6.
IMPORTANT: Before proceeding,
wait for the SYS LED on the
groov
Box to stop blinking green,
then make sure to refresh your browser.
Summary of Contents for GROOV BOX
