25
In
Error! Reference source not found.
, please click direction arrows (See Figure 2-19) to adjust PTZ position.
There are total 8 direction arrows. Please note if you use remote control, you can use just four directions
(Up/down/left/right).
The speed value ranges from 1 to 8.
Figure 2-19
2.5.3
3D Intelligent Positioning Key
At the center of the eight directional arrow buttons is the 3D intelligent positioning key. See Figure 2-20. Please
note, this function needs protocol supported by the PTZ camera and can only be operated by mouse.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size.
It can activate PTZ automatically.
Figure 2-20
You can click set button in
Error! Reference source not found.
(or click REC button in the front panel) to set
preset, tour, and pattern.
You can click page switch button in
Error! Reference source not found.
(or click Fn button in the front panel) to
call main function.
